Big Dent Removal Techniques – Dodge Challenger Scat Pack

Big Dent Removal Techniques

Back again for another paintless dent repair and here we are going to show you some of our big dent removal techniques on this Dodge Challenger Scat Pack edition. This vehicle was brought to us with some tree limb damage. Yes that is right, a tree company was unfortunately cutting down some tree branches above this car and during the process they fell all over this vehicle. This caused damage all over including the hood, fender, roof, roof rails, trunk lid but today we are focusing on just the quarter panel damage.

What Tools Did We Use?

We started off these repairs by gaining access to the backside by removing the interior trim panels in the trunk. From there we remove the tail light and work through the wiring access hole for the tail light. The first tool we used was actually an Ultra Dent Tools double bend tool with an interchangeable tip and extension. We start off a repair like this with a bigger ball style tip. From there we slowly downsize the tip size to get more precision pushes. Towards the end of the repair the damage actually started to slightly oil can, shown in the video. The panel is very flimsy and movable with just minor pushes with our fingers. We knew we had to tighten the metal up so we started by using some electronic tools.

Electronic Dent Removal?

In this repair towards the end of the repair like stated prior we had to resort to using some electronic style tools for this repair. What we are using is the steel hotbox machine from Betatag. This tool uses electromagnetic heat induction to heat up the panel. We heat up the panel with this tool to a safe temperature that will NOT damage the paint finish. From there we then spray the area with a cold spray. This method of quickly heating the metal and quickly cooling the panel is nothing new to metal workers. What this does is tighten up the molecules in the metal making it shrink. This shrinking action tightens up the metal so it does not remain flexible after the finished repair. Say for instance we DID NOT do this, the panel make at some time be pushed in from say someone leaning on the vehicle or a high pressure car wash for instance. More than likely with this minor stretched metal it will not stick inwords looking like a dent but it could happen so we must take special precautions to prevent this.

Finishing it up

In the end we were able to remove not only this damage but damage all over the vehicle from the tree limbs. We use only the paintless dent repair method for our repairs and no painting, body fillers or primers were used in these repairs. Be sure to Subscribe to our Youtube channel to see other repairs we performed on this vehicle coming soon.

 

 

Do you have some damage in your own vehicle?

Would like to discuss a repair you with us?

Give Us A Call!

Text Us Your Damage Photos Here!

Request A Call Back!