Body Line Dent Removal – 2019 Ram 1500 Warlock

Body Line Dent Removal

Here we use paintless dent removal to remove this deep body line dent in 2019 Ram 1500 Warlock right side fender. All of this damage was removed using the paintless dent repair method. With this method of repair we us specialized tools to slowly push the damage out. We started this repair off by using a tool called a Dent Dial, the model number was the 35L. We attached a soft rubber ball style tip to the end of this tool to start the first pushes. From there we switched to an interchangeable tip tool from ultra dent tools. On this tool we went with a slightly smaller tip called a R4 which indicates the size then added a red cherry cap to it to soften the pushes. From there we progressively move to a smaller and sharper tip to do the final detail work on this dent.

 

It’s Hot In Here!

In this repair, because of the extreme depth, we had to use heat. So what we do is setup a heat gun to constantly apply anywhere from 160-180 degrees to this damage area the entire time we are pushing this dent out. If we do not go about doing this you run the risk of the paint being damage from the extreme pushes needed to push this damage out. Heat is the number one key in this repair. Without it the paint would almost certainly be damaged with the extreme pushes we had to make to get this damaged area back out.

 

 

 

Do you have damage like this in your vehicle?

Have a question about your damage and wondering if it is a candidate for the paintless dent repair method?

Give Us A Call!

Text Us Your Damage Photos Here!

Have Us Call You!