Harley Davidson Gas Tank Dent Restored with PDR

Harley Davidson Gas Tank Dent Restored with PDR

Sioux Falls, South Dakota, has a rich motorbike culture, and there are plenty of scenic trails and clean, wide motorways where you can enjoy riding your motorbike. There are plenty of makes and models of bikes around, including highly desirable brands like Ducati and Harley Davidson.

If you own a Harley Davidson in South Dakota, you are likely a proud biker and love your chopper or motorbike more than the other vehicles in your garage.

However, your expensive Harley is not a typical motorbike, and as such, it needs superior care and attention. If your fenders or gas tank experience dents or dings while riding, you need to take care of them immediately.

When left unchecked, the dent can crack the paint over time and let moisture and water in, causing the metal underneath the paint coat to rust. Any dents, dings, or paint damage on your Harley Davidson’s gas tank can seriously devalue it.

Your best solution is paintless dent repair (PDR) in Sioux Falls, South Dakota, from a reliable, certified PDR company like Sioux Falls Dent Repair.

Harley Davidson Gas Tank Dent Restored with PDR

PDR is your best dent repair solution because, unlike conventional dent repair methods, PDR does not scrape, fill, or repaint your gas tank to remove dents and dings. Instead, it restores the gas tank to its original form without tampering with its original factory paintwork.

It’s a restorative dent repair process that does not devalue your expensive Harley Davidson as a typical auto body shop does through their conventional repair methods. Similarly, don’t opt for DIY dent repair kits.

It would be best if you only trusted a PDR-certified technician to perform dent repairs on your precious Harley.

Why DIY Is Not An Option

DIY dent repair kits are unreliable and do not repair most dents, especially gas tank dents. If you attempt to repair them yourself, you will likely complicate the dent or, worse, damage the paint.

Here, you only need to let PDR-certified technicians like those at Sioux Falls Dent Repair handle PDR for the gas tank dents of your Harley Davidson. These professionals are highly trained and experienced at repairing dents and dings on high-end motorbikes.

They are certified, which means they don’t make mistakes, don’t complicate dents, and don’t damage the paint. You’ll see amazing results that do not damage your Harley, its original factory paintwork, or resale value.

The results are truly amazing, and no one will be able to tell that there were any dents or dings ever. PDR-certified technicians restore your Harley Davidson and make it look like the damage never existed.

Why Sioux Falls Dent Repair for PDR on Your Harley Davidson?

When it comes to PDR-certified technicians and paintless dent repair for your Harley in Sioux Falls, South Dakota, there is no better company than Sioux Falls Dent Repair. They have the most skilled and experienced PDR-certified technicians for the job.

With years of experience repairing gas tank dents on Harley Davidson motorbikes, you can trust that your precious Harley is in good hands.

If you want to learn more about gas tank dents, paintless dent repair, or if you want a free estimate for the dents and dings on your Harley Davidson, please visit our website today.

Dent Repair on a BMW R1250RT Motorcycle

Dent Repair on a BMW R1250RT Motorcycle

Dent Repair on a BMW R1250RT Motorcycle


Sioux Falls, South Dakota, is a great place for motorcycle enthusiasts. The clean roads and scenic views make for excellent tours. You will also find plenty of like-minded motorcyclists and groups to ride around with.

As such, if you own an expensive and desirable motorcycle like the BMW T1250RT, it is best to take good care of it on your tours. Often, after long tours, your motorcycle may pick up a few dents or dings along the roads and trails.

If so, it is important that you get dent repairs immediately to prevent your BMW R1250RT’s body from catching rust or corrosion. However, your motorcycle deserves the best, and in Sioux Falls, South Dakota, this means opting for the best paintless dent repair (PDR) from Sioux Falls Dent Repair.

Dent Repair on a BMW R1250RT Motorcycle

Whether it’s dents, dings, or a motorcycle fender repair, you should only opt for the PDR process for your BMW R1250RT. It is the latest and greatest dent repair method for motorcycles and offers incredible benefits as well.

The PDR process for your BMW R1250RT takes three steps at a professional PDR service like Sioux Falls Dent Repair; they include:

  • Step 1- Start With a Clean Slate
    Your BMW R1250RT is thoroughly cleaned to start fresh without any dirt or elements getting in the way.
  • Step 2- Damage Assessment
    A PDR-certified technician examines the dents and dings under a special PDR UV light that exposes even the smallest discrepancies on the body of your BMW R1250RT.
  • Step 3- Exceptional Dent Repair
    The PDR-certified technician uses special tools like push and pull techniques to gently remove the dents and dings from your BMW R1250RT.

Unlike traditional dent repair, the PDR process is executed by a professional without the need for any scraping, filling, or repainting.

Benefits of PDR on a BMW R1250RT

The innovative PDR process results in immaculate results and comes with many benefits for motorcycle owners.

  • Service As Fast As Your Motorcycle

Unlike traditional dent repair, PDR does not take much time because no scraping, repainting, or drying is involved. You can ride away in your repaired BMW R1250RT in just a few hours, instead of leaving it at the shop for a few days.

  • Surprisingly Low Costs

The lack of fillers and expensive BMW paint in the PDR process means that you don’t have to pay for such materials. PDR ends up costing less because you only pay for the skills and experience of a PDR-certified technician, like those at Sioux Falls Dent Repair in Sioux Falls, South Dakota.

  • Preserve Originality For Longer

Since there is no repainting, you preserve the originality and resale value of your BMW R1250RT.

Why Sioux Falls Dent Repair for Your Motorcycle?

Your BMW R1250RT is an expensive motorcycle that represents the upper echelon of motorcycle engineering, and as such, you only want the best, most experienced, and meticulous professionals working on its dents and dings.

This is exactly what Sioux Falls Dent Repair offers. They have the most skilled and proven PDR-certified technicians in Sioux Falls, South Dakota, who have plenty of experience repairing dents and dings on BMW R1250RT motorcycles.

If you want to learn more about dent repair on a BMW R1250RT motorcycle, paintless dent repair, or if you want a free estimate for the dents and dings of your BMW R1250RT, Get your Free Estimate Started Now, Just Click Here!





Motorcycle Paintless Dent Repair Tool Accessories

Motorcycle Paintless Dent Repair Tool Accessories

Motorcycle Paintless Dent Repair Tool Accessories


Today we are going to be checking out some of the accessories that fit onto the Motorcycle Tank Vice for motorcycle dent repair from Ultra Dent Tools that we discussed a few days ago. The first accessory that we’re going to be looking at is something that we use to protect the metal surrounding the gas filler opening. It is a simple plastic ring that drops into most of the motorcycle’s fuel tank openings. There is also a copper ball accessory that fits into the opening of the ring. The ball has a pivoting hole that allows a tool to slide through and then it can be locked in with an Allen Key. What this helps with is to keep the tool secure and allows you to put as much or as little leverage as is required to fix a dent in the tank without damaging or scratching the metal. Another helpful tool or tools is something that can keep the tank in place and secure it so that technicians can work on the tanks without worrying about it sliding or shifting around. It is quite difficult to explain most of these tools without having a tank to actually showcase them. When you’re working with motorcycles, you always have to make adjustments because every bike manufacturer is going to put something different on their bikes, so you always should have options to get the right fit for every model.

When installing a fuel tank onto the vice, we always have to make sure that we get a tight and secure fit so that we don’t get any slip-ups when pushing out a dent. Spacers are a great accessory to use when we need to get a snug fit for any type of tank and they come in all different sizes. Using plastic washers between the tank and any other metal (washers, nuts, screws, etc.) ensures that we don’t scratch up the original paint work or damage the metal on the tank or panel that we are working on.

A product that has really come in handy for most of the motorcycle vice accessories is a box that I purchased from Walmart which is more commonly used for separating fishing equipment. It has enough space to store the smallest accessories without getting them mixed up with the other accessories. If and when we get a motorcycle tank to work on, I can explain and demonstrate how these accessories and tools work in reality – so stay alert for that.





If you have questions or queries, leave them down in the comments section below and we’ll be happy to get back to you.

You can also call or text us directly on 605-250-1023 or Click Here to start the repair process now!




Motorcycle Paintless Dent Removal Tools

Motorcycle Paintless Dent Removal Tools

Motorcycle Paintless Dent Removal Tools

Today, we will be following up on the discussion we had a couple of days ago about motorcycle dent repair. We spoke earlier about the Motorcycle Tank Vice and the PDR for motorcycles, and today, we will be diving into the various tools that we here at Sioux Falls Dent Repair use to work on motorcycles.

All the tools showcased here are available on Ultra Dent Tools and as we mentioned in the previous video, if you are getting into motorcycle paintless dent repair, you should be buying all the tools and accessories. One of the biggest reasons for this is because motorcycle repair tools are actually a lot stronger than car repair tools.

One of the commonly used tools is the Soft Tip Wheel Lip which can be used practically anywhere on the motorcycle but is predominantly used to get out dents from around the gas lid/gas hole. The accessory that fits onto the wheel lip is also from Ultra Dent Tools and is called the adjustable T-Handle. It allows us to use the tool from any angle we need and get the dent out using as much or as little leverage as is required. There is also an extension rod that fits onto the end of the Soft Tip Wheel Lip and makes it longer so we can reach further and get to dents even better. All the Wheel Lips allow interchangeable tips so we can use different tips for different jobs without having to actually replace the tool entirely. Most of our interchangeable tips come from Edgy Tools and they work equally well on cars as well as motorcycles.

Going back to the point about buying all the tools available if you plan on getting into motorcycle dent repair, Ultra Dent Tools usually offers discounts during the holiday season and Black Friday where you can easily get about 10-15 percent off on their tools.




If you have any questions or queries call or text us directly by Clicking Here.

Have a dent in your motorcycle? Start the repair process now!



Motorcycle Paintless Dent Removal Tank Vise – MPDR

Motorcycle Paintless Dent Removal Tank Vise – MPDR

Motorcycle Paintless Dent Removal Tank Vise – MPDR


Today at the Sioux Falls Dent Repair HQ, we are going to be talking about a motorcycle tank vice and how we use it in the shop. The one that we use is from Ultra Dent Tools and is actually used for not only motorcycle tanks, but also for fenders and other panels as well.

With this specific model, there are other accessories that can be attached to make any type of repair work easier. While the first version only came with a single center post, the new version, called 2.0, now comes with a back post for better stability. However, the first version was designed for mobile repairs and could be attached to the back of a truck for repairs on the go.

Since motorcycles are more rarely used this time of the year, it will be the perfect opportunity for anyone looking to get some repair work done or even some modifications done to their bikes. The motorcycle vice makes it easier to hold the tank in place so we can work on it without having to worry about the handlebars getting in the way. Plus, the metal used on some of the bikes out there is a lot thicker than what is used on cars so we need all the leverage we can get when pulling out a dent from a motorcycle tank.

The vice itself is extremely adjustable and maneuverable so that we can work on a panel from different angles without complications. The version 2.0 also comes with a “tool bender” addition that allows us to use different types of tools such as a dent dial to get out all kinds of damage.

A Must Have

If you are thinking about getting into PDR or already are and are now looking at getting into motorcycle repairs as well, our advice would be to get all the tools needed because they will help you in the long run. There are a wide range of accessories that can be used when it comes to motorcycle repair and we will take a closer look at that sometime in the near future.




Have a dent in your motorcycle? Give us a call or text us at Click Here!.

Click Here to start the repair process now!