Will this dent pop out? Acura Paintless Dent Removal

by | Dec 4, 2021 | Dent Repair, DIY, Educational

Will This Dent Pop Out?

 

Today, we will be discussing a common question we get. Will this dent pop out?

Warning: DO NOT TRY THIS AT HOME!

We will be working on a 2014 Acura MDX R. The car came in with quite a big dent on the front right side fender and we’re going to use the Paintless Dent Repair method to get the damage out. Before we can get working on the fender with our tools, we have to remove the wheel well liner. This will give us the access we need to get our tools in and work on the dent and damage better. In these kinds of repairs, it works out best if we have multiple points of access so we can give the customers our best work. We did inform the owner of the car that we would be removing the front bumper as well as the headlight.

 

We actually started the repair by heating up the damaged surface and then pushing the majority of the dent out by hand. Now, you guys shouldn’t try this at home because it can cause the paint to crack and even peel off, leave it alone and don’t damage the panel even further! Once the dent is pushed out by hand, we can use our PDR tools to get out the smaller damage and remove the crowns and waves and all of the small imperfections to make this a true repair.

 

 

 

 

As you can see, the repair takes a lot longer than you might think and we here at Sioux Falls Dent Repair ensure that your car will look as good as new when we’re done with it.

If you have any questions or queries,  call or text us directly at 605-250-1023

 

 

 

 

 

 

 

Archives