Do You Have the Right to Select Your Own Hail Repair Company?
When a hailstorm hits, damages to your vehicle are bound to happen. These damages can leave dents and dings on your car’s body, and you will need to file an insurance claim.
Choose the Best Hail Repair Shop
There are two options available you can select from. Either select an auto body shop from the list your insurance company provides of approved shops or find your own shop to handle the repairs on your vehicle.
To keep yourself away from further headaches, choosing the best repair shop at the beginning will protect your car from future problems.
Types of Hail Repair
There are numerous options body shops provide for hail repair.
When it comes to repairing those dents, you have two choices: Traditional bodywork and Paintless dent removal
Traditional Bodywork
This is for the more severe damage that necessitates filling the dent and repairing the stain. It will typically take some days in the store.
This may include:
Replacing body panels
Using fillers or glazing
Heat repair using an oxyacetylene torch
Paintless Dent Removal
Paintless dent removal can often be the best choice for a vehicle. PDR entails going to the rear of the dent and massaging the body back into place. This choice is fast, simple and less likely to affect the valuation of your vehicle. It is also less expensive, but it isn’t always an option with some dents and losses.
What You Need To Know When Choosing a Company for Dent Repair
Most insurance companies give their customers the option to either choose from their list of approved companies or select the company of their choice to get their vehicles repaired.
When choosing a company to get your vehicle repaired, you need to keep in mind some factors.
Any company you choose must have the necessary tools to remove any dents. Dent repair is not what you can do yourself; it’s a job for professionals. This implies that the company you choose must have all of the necessary equipment to carry out the repair. Before you decide, double-check for all of the appropriate resources available.
To obtain the necessary effects, auto dent repair requires the use of the appropriate technology. Dent removal companies that use cutting-edge technologies should be at the top of the list of companies you should consider. As advanced equipment provides high-quality facilities, dents and dings are easy to remove.
Dent repair requires expertise. Only certified and experienced professionals can do it. When looking for a company to get your vehicle repaired, always look for a company and ask for proof of the necessary certifications.
Why Sioux Falls Dent Repair?
Sioux Falls Dent repair has the best customer services. Sioux Falls gives its customers the privilege to talk to their customers and listen to their problems while offering you recommendations. Sioux Falls gives its customers free estimates and repair facilities from certified technicians, making us a popular choice for most customers.
Contact Us
Next time a hailstorm damages your car, make sure to look at these factors when you choose a dent repair company. If you live in South Dakota, Sioux Falls Dent Repair has got it covered for you. You can CLICK HERE or call for a quoteCLICK HERE TO CALL
Today we are removing some damage in a 2018 Ford Edge using paintless dent repair. This damage is in the right rear door and is very extreme damage. The damage is on a body line and very deep and has a bunch of displaced metal all around the area. In order to remove this damage we had to use a heat gun and apply a constant 160-180 degrees when pushing out the last little bit of this damage.
Have similar damage and want to call or text us: Click Here
Hail Damage? Be Careful Using the Insurance Company’s Lowest Bidder
Residents of Sioux Falls, South Dakota, are sure to encounter hailstorms and subsequent damage to their properties. Their cars can take significant hail damage if they are unlucky enough to park them outdoors during a hailstorm.
Hail damage on cars can cause their roof, hood, and trunk to bear dents and dings. If the hailstorm is severe, the sides and fenders can also get dents and dings. Hail damage on cars can be very costly in the long run if it’s not immediately fixed.
Dents and dings can corrode the paint over time and expose the body parts to the elements, which can cause them to rust.
Hail Damage Repair
Your best bet for repairing hail damage is visiting Sioux Fall Dent Repair. They are the best at repairing dents and dings on any make or model of car. They have experienced and professional certified technicians, who can perform paintless dent repair (PDR).
PDR is what you want to opt for when your car sustains dents and dings from hail damage because it is the fastest and most non-invasive dent repair method. It can restore your car to its original form without any scraping, fillers, or repainting at a reasonable cost.
The best part: Sioux Falls Dent Repair accepts most insurance providers that cover hail damage on your car. They will cover the costs of your PDR; however, you must be careful using the insurance company’s bidders.
Be Careful Using the Insurance Company’s Lowest Bidder
Insurance companies usually offer repair bids from 3 repair shops on their panel. You can choose one of them or opt for your repair shop. These repair shops typically make low bids to keep getting work from your insurance company.
Choosing the lowest bidder for repairs to save money may not be your best option that they may cut corners. Most importantly, you want to look for repair shops that are experienced and have certified technicians.
The good news is that you do not have to opt for the repair shops that your insurance provider offers you. You can choose your repair shop and in Sioux Falls, South Dakota; hence, choose Sioux Fall Dent Repair for PDR on your hail-damaged car.
Why Sioux Falls Dent Repair Services?
The main reason you want to opt for Sioux Falls Dent Repair is that they have certified, experienced technicians that can perform PDR for the best results. They have expertise in performing PDR on any make and model. Rest assured that your car is in good hands and they’ll do a satisfactory dent repair job.
Sioux Falls Dent Repair gives you an economical free estimate on your damage, and you can trust the best repairs for the dents, dings, and hail damage on your car.
If you want to learn more about paintless dent repair, insurance company biddings, or simply to get a free estimate for the dents and dings on your car, Click Here Today!
Full Glue Pull Demonstration for Paintless Dent Repair and Dent Removal
Today, we’re going to demonstrate how glue pulling really works and we have a door ding on a 2018 Ford F-150 to take care of. The body of the truck is made from aluminum and we’re going to take a look at how it differs from a regular steel body vehicle. We will also get into why glue pulling is considered for the repair rather than pushing on the metal from the inside.
The dent itself is not too severe and that is why Jack chose to do the repair live. As you can see, the dent is close to the door handle and with the PDR light, we can see that it isn’t too deep either. The special PDR light allows us to see dent clearly as we as any damage that might show up around it. Along with an aluminum body, the truck also has laminated safety glass which makes it difficult to use the traditional method of lowering the window and going in through the window channel.
Why does the type of glass make a difference? Well, there are basically two types of glass that are used in cars – tempered and laminated. The difference between the two is that laminated glass cracks and tempered glass shatters when damaged. Laminated glass is made from two different pieces of glass that are joined together with a film that keeps the glass together rather than breaking into pieces. Laminated glass can easily crack when pressure is applied to the edges which are why glue-pulling is the preferred method for PDR.
As you already know, at Sioux Falls Dent Repair, we use all types of glue-pulling tabs from all the best brands such as KECO, Edgy Tools, Robo Tabs, and Black Plaque PDR. They all bring their own benefits to the table and we always have them at hand for any type of repair.
Getting back to the dent, Jack starts things off with the Edgy Tools glue tabs because they don’t have the strongest grip on the metal and this kind of dent requires small pulls rather than large ones. After applying the glue, Jack gets two pulls on the tab and the glue stays on the car. This allows for a softer pull because the dent is not excessively large. With the first two pulls, we can see a little progress but we all know that PDR takes time and patience.
The next tab being used is the Root Beer from Anson PDR. With this tab, Jack is using a Robo Mini Lifter from KECO which takes the tab off with a loud “pop”. Once the tab is off, we can see that there was a little bit of an overpull which was expected with the type of tab and tool combination. Under the PDR lights, we can see the high spot on the dent and Jack has to now push the metal back down. For this, Jack chooses the KECO Root Beer Knockdown tool and the Shane Jacks Blending Hammer with Edgy Tools tips. With just a couple of minutes of knockdown work, we can see how Jack has almost taken out all the damage. There are only a few spots left that will be taken out by wet sanding and polishing the area. Jack completes the repair with a couple of small pull tabs and a few more seconds of hammering. After a little bit of polishing, Jack is happy with the result and is ready to move on to another dent on the other side of the vehicle.
If you have any questions or queries, give us a call or text us at by Clicking Here
