Hail Damage Repair Access

Hail Damage Repair Access

 

Hail Damage Repair Access: How do we access the back side of hail damage dents to push them out with our tools?

Jack Bucknell with Sioux Falls Dent Repair shows you how we access areas on this 2010 Subaru for us to make hail damage repairs.We already took the door panels off, as well as the glass assemblies and all the necessary trim has been removed in order to gain access to this area of the tops of the door assemblies on the left passenger side.

This vehicle had hail damage and we had to access the damage from the backside in order to push this damage out. Even though access on this damage is not terrible we still do have to use the glue pull method in order to remove all of these dents. We use an Elmident Glue Gun fitted with a Dewalt battery for our glue supply. We use Hawg Glue  from Anson PDR to glue our tabs to the vehicle to remove dents. We then use a combination of glue tabs from Black Plague PDR  and Keco to do the pulling. To pull the tabs once they are glued on we use a slide hammer or a mini lifter available from multiple PDR suppliers, the ones we use are available from A-1 PDR Tools.

We then talk about access to other areas of the vehicle. Subaru’s are well known for having a high safety crash test ratings. How they go about doing this especially in the doors and side impact areas is those areas are heavily braced with internal bracing that you won’t see until you take the vehicle apart and inspect the structure. We show you a good example of how this bracing looks and how it can effect the dent repair process.

Contact us for a free quote on your vehicle’s hail damage repair