Today we are removing some damage in a 2018 Ford Edge using paintless dent repair. This damage is in the right rear door and is very extreme damage. The damage is on a body line and very deep and has a bunch of displaced metal all around the area. In order to remove this damage we had to use a heat gun and apply a constant 160-180 degrees when pushing out the last little bit of this damage.
Today, we’re going to demonstrate how glue pulling really works and we have a door ding on a 2018 Ford F-150 to take care of. The body of the truck is made from aluminum and we’re going to take a look at how it differs from a regular steel body vehicle. We will also get into why glue pulling is considered for the repair rather than pushing on the metal from the inside.
The dent itself is not too severe and that is why Jack chose to do the repair live. As you can see, the dent is close to the door handle and with the PDR light, we can see that it isn’t too deep either. The special PDR light allows us to see dent clearly as we as any damage that might show up around it. Along with an aluminum body, the truck also has laminated safety glass which makes it difficult to use the traditional method of lowering the window and going in through the window channel.
Why does the type of glass make a difference? Well, there are basically two types of glass that are used in cars – tempered and laminated. The difference between the two is that laminated glass cracks and tempered glass shatters when damaged. Laminated glass is made from two different pieces of glass that are joined together with a film that keeps the glass together rather than breaking into pieces. Laminated glass can easily crack when pressure is applied to the edges which are why glue-pulling is the preferred method for PDR.
As you already know, at Sioux Falls Dent Repair, we use all types of glue-pulling tabs from all the best brands such as KECO, Edgy Tools, Robo Tabs, and Black Plaque PDR. They all bring their own benefits to the table and we always have them at hand for any type of repair.
Getting back to the dent, Jack starts things off with the Edgy Tools glue tabs because they don’t have the strongest grip on the metal and this kind of dent requires small pulls rather than large ones. After applying the glue, Jack gets two pulls on the tab and the glue stays on the car. This allows for a softer pull because the dent is not excessively large. With the first two pulls, we can see a little progress but we all know that PDR takes time and patience.
The next tab being used is the Root Beer from Anson PDR. With this tab, Jack is using a Robo Mini Lifter from KECO which takes the tab off with a loud “pop”. Once the tab is off, we can see that there was a little bit of an overpull which was expected with the type of tab and tool combination. Under the PDR lights, we can see the high spot on the dent and Jack has to now push the metal back down. For this, Jack chooses the KECO Root Beer Knockdown tool and the Shane Jacks Blending Hammer with Edgy Tools tips. With just a couple of minutes of knockdown work, we can see how Jack has almost taken out all the damage. There are only a few spots left that will be taken out by wet sanding and polishing the area. Jack completes the repair with a couple of small pull tabs and a few more seconds of hammering. After a little bit of polishing, Jack is happy with the result and is ready to move on to another dent on the other side of the vehicle.
Is your 2014 Acura MDX suffering from dents or dings?
The Acura MDX is a great mid-sized, 3-row luxury crossover from the Japanese automaker. It serves as an excellent family car or daily driver, thanks to its ample space, powerful engine, and good gas economy. It is no surprise that the MDX is one of the best-selling crossovers of all time in the US.
With so many Acura MDXs on the roads of Sioux Falls, South Dakota, it is not uncommon for us, at Sioux Falls Dent Repair, to encounter dents and dings on these crossovers. Therefore, we always recommend a Paintless Dent Repair or PDR, for fender benders, bumper dings, or dents to all our customers.
Paintless Dent Repair or PDR is the best solution to minor to moderate dents and dings on your 2014 Acura MDX because it is the fastest and least invasive way to repair your crossover. Here is how a certified technician performs PDR on your Acura at Sioux Falls Dent Repair.
This entire process requires the skills and expertise of a Sioux Falls Dent Repair certified technician for the best PDR results.
PDR is not only a good option to repair dents and dings, it is the best option because it saves you time, money and paperwork, while retaining the resale value of your Acura MDX. Unlike traditional dent repair, PDR does not involve scraping, fillers, repainting or part replacement of any kind.
Let’s discuss the main benefits of PDR at Sioux Falls Dent Repair in some detail.
Always opt for a Paintless Dent Repair for your Acura MDX R and if you are in or around Sioux Falls, South Dakota, we highly recommend Sioux Falls Dent Repair for the best PDR services. They have experienced certified technicians, who get the job done right.
Check out how Sioux Falls Dent Repair restored this Acura MDX R with a right fender dent: https://www.youtube.com/watch?v=-jBF8Nxx3Do.
Get a free estimate for the dents and dings on your car by CLICKING HERE today and make an appointment.
Caught in a hailstorm while driving?
Most people can enjoy a bit of light hail but hailstorms are a whole other story. They are noisy, dangerous, and damaging, to say the least. If you live in the midwest, you are no stranger to hail and hailstorms.
There have been over 30 confirmed reports of hail in Sioux Falls so far this year and over 20 severe weather warnings in the last 12 months. During bad weather occurrences, residents of Sioux Falls and people who are traveling through may get caught in a hailstorm while driving.
This can be dangerous.
Let’s discuss what you can do in this situation and how Sioux Falls Dent Repair can help repair your car’s dents and dings after the hailstorm with Paintless Dent Repair (PDR).
Here is a step-by-step guide for what you should do if you get caught in a hailstorm while driving in Sioux Falls.
As much as you want to just leave your car and get indoors, do not make the mistake of leaving your car during a hailstorm. Severe hailstorms mean golf ball-sized hail, which can easily land you a trip to the hospital. Your car’s roof is ample strong, and you should wait out the hailstorm in your car.
Driving in a hailstorm is not an option. Moreover, the speed of your car and the hailstorm can do greater damage to your car and even shatter windows. Your best bet is to slowly pull over to the side, away from traffic, and switch your hazard lights on.
Huddle to the center of your car and away from the windows to avoid injury in case the window breaks. Every inch counts so pull everyone near the center of the roof.
Shattering glass can fly very far. Find an extra jacket, blanket, or any thick fabric to cover your head and eyes, and the same goes for the passengers.
Once the hailstorm passes, which you will know when the noise stops, drive your car to safety. Drive to safety before you check your car for damage. It might have gone through a lot, but it cannot get any worse till you reach safety.
It is inevitable that your car’s roof, hood, and other parts look like they were popping corn. After a hailstorm, it is best to get the dents and dings fixed quickly, and Sioux Falls Dent Repair‘s Paintless Dent Repair (PDR) is the best and fastest solution.
Sioux Falls Dent Repair provides the most experienced, reliable, and certified technicians for PDR in and around Sioux Falls. Their certified technicians are experts in repairing dents and dings with PDR on any make and model of cars.
They can get your car repaired in the fastest time with the best results that restore your car to its original form.
If you want to learn more about Paintless Dent Repair (PDR) at Sioux Falls Dent Repair or how you can get a free estimate for your car’s dent and dings, click here to get started!
Dents on jeeps are inevitable. When you use your jeeps for off-road adventures on rugged terrains and rocky roads, it is easy to pick up dents and dings. This will make your jeep look more battered and also lower its resale value.
Jeeps and cars have bodies made of aluminum. The aluminum panels make repairing the dents and dings much more difficult. Aluminum used in automobiles is not brittle and comes in a variety of strengths. They are hard to dent as they take double the amount of force to dent as opposed to mild steel.
Dent repair of jeep wranglers takes much more force as well as different tools to get it right.
Your jeep wrangler can have numerous types of dents. But Sioux Falls knows how to remove all these dents effectively. Here is a list of some of the most common dents.
Round dents are caused by round objects hitting the bumper, door, or hood. These could be hailstones, rocks, footballs, baseballs, basketball, causing a dent to be formed immediately.
Car dings are the type of dents that occur when small objects hit your jeep on a windy day or during a rocky ride. Most damage of this nature is easy and affordable to repair, as it is mostly a small scratch, crack or chip in the paint. To keep your jeep’s value high, it is essential to get these minor dents and dings repaired with PDR as soon as possible to avoid further damage to your jeep.
Crease dents stretch your jeeps metal. They are complex and time-consuming to repair but can repair using PDR. Using advanced and modern techniques, crease dents are no longer a problem and can repair easily.
Paintless dent repair (PDR) is a cost-effective way to restore the car’s body to factory-like condition in the least amount of time and cost. Most auto dent removal requires using body fillers or paints to fill in dents that are not as long-lasting.
Bondo and fillers are used in traditional body shop repairs to make the car’s surface look straight, while paintless dent repair simply fixes your jeep’s dent. Our certified technicians take their time softly massaging the metal back to its original condition, preserving the factory finish.
If your jeep got a dent and you live in South Dakota, Sioux Falls has got it covered for you. You can visit our Instagram page to have a look at our best services or click here to get your repair process started!
In today’s quick video, we are tackling some crease-style dents on the hood of a 2019 BMW X3. According to the owner, they came out from a restaurant they parked at and saw the dents on their car’s hood.
The hood of the X3 is made from aluminum and has absolutely no access points on the back of the hood which is why we had to opt for the glue pulling method for removing the dents. Fortunately, we here at Sioux Falls Dent Repair have a lot of experience in glue pulling and own some of the best pull tabs in the industry.
As you can see in the “after” footage, the dents and other damage was completely removed and the hood looks as good as new.