Today we are removing some damage in a 2018 Ford Edge using paintless dent repair. This damage is in the right rear door and is very extreme damage. The damage is on a body line and very deep and has a bunch of displaced metal all around the area. In order to remove this damage we had to use a heat gun and apply a constant 160-180 degrees when pushing out the last little bit of this damage.
Caught in a hailstorm while driving?
Most people can enjoy a bit of light hail but hailstorms are a whole other story. They are noisy, dangerous, and damaging, to say the least. If you live in the midwest, you are no stranger to hail and hailstorms.
There have been over 30 confirmed reports of hail in Sioux Falls so far this year and over 20 severe weather warnings in the last 12 months. During bad weather occurrences, residents of Sioux Falls and people who are traveling through may get caught in a hailstorm while driving.
This can be dangerous.
Let’s discuss what you can do in this situation and how Sioux Falls Dent Repair can help repair your car’s dents and dings after the hailstorm with Paintless Dent Repair (PDR).
Here is a step-by-step guide for what you should do if you get caught in a hailstorm while driving in Sioux Falls.
As much as you want to just leave your car and get indoors, do not make the mistake of leaving your car during a hailstorm. Severe hailstorms mean golf ball-sized hail, which can easily land you a trip to the hospital. Your car’s roof is ample strong, and you should wait out the hailstorm in your car.
Driving in a hailstorm is not an option. Moreover, the speed of your car and the hailstorm can do greater damage to your car and even shatter windows. Your best bet is to slowly pull over to the side, away from traffic, and switch your hazard lights on.
Huddle to the center of your car and away from the windows to avoid injury in case the window breaks. Every inch counts so pull everyone near the center of the roof.
Shattering glass can fly very far. Find an extra jacket, blanket, or any thick fabric to cover your head and eyes, and the same goes for the passengers.
Once the hailstorm passes, which you will know when the noise stops, drive your car to safety. Drive to safety before you check your car for damage. It might have gone through a lot, but it cannot get any worse till you reach safety.
It is inevitable that your car’s roof, hood, and other parts look like they were popping corn. After a hailstorm, it is best to get the dents and dings fixed quickly, and Sioux Falls Dent Repair‘s Paintless Dent Repair (PDR) is the best and fastest solution.
Sioux Falls Dent Repair provides the most experienced, reliable, and certified technicians for PDR in and around Sioux Falls. Their certified technicians are experts in repairing dents and dings with PDR on any make and model of cars.
They can get your car repaired in the fastest time with the best results that restore your car to its original form.
If you want to learn more about Paintless Dent Repair (PDR) at Sioux Falls Dent Repair or how you can get a free estimate for your car’s dent and dings, click here to get started!
Since there has been a greater strive for fuel efficiency and lower carbon footprints, electric vehicles have started to gain popularity. Since there are more electric cars on the road, like a Tesla (Model 3, Model Y, Model S or Model X), Hyundai Kona, or a Jaguar I-Pace, more and more of these vehicles have started to show up for dent repair services in Sioux Falls. The types of systems that are used to repair these dents can vary.
If you’re going to Sioux Falls Dent Repair for dent removal from your electric vehicle, you’d be glad to know that they are the only dent repair shop in Sioux Falls that are IMI certified. Because of this reason, you know you can trust their dent repair services.
Incurring hail damage or dings to your electric vehicle can be very stressful – especially if you have an electric vehicle. Fortunately for Sioux Fall residents, technicians at our shop can quickly diagnose the problem your car has, repair the dents and dings, and restore your electric vehicle to its initial condition.
After the repair is done, your car will be available for you to pick up.
Sioux Falls Dent Repair is the premier paintless dent repair specialist in Sioux Falls. Not only do we specialize in paintless dent repair, but we are also the only IMI certified car repair shop in Sioux Falls. If you’re booking an appointment for a paintless dent repair at our shop – in most cases, you’ll get your vehicle back the same day.
The certifications that we have are:
Every day, our expert technicians work on the cars that come into our shop. The PDR process can remove a dent or ding from your electric vehicle without compromising the paint or hurting too much of your wallet. But how does the PDR process work?
The first step to any repair process is evaluating the damage that has been done. Where did the dent happen? How big is it? How can I reach the dent? After evaluating the dent and determining if it can be removed through PDR, the area around the dent is prepared for PDR.
In most conditions, a technician will access the dent from the back side. This means that they will first carefully remove the trim panels, the taillights, and in some conditions, they might have to remove panels like the hood or trunk lid as well.
Once the dent can be accessed, the technician can perform PDR to fix the body of your car. It is crucial that for this step of the process, you have an expert technician working on your car.
With the help of specialized tools, the body of the car is massaged so the exterior can be restored to its original position. Because of the expertise of our technicians, we can complete the PDR process on the same day you send us our vehicle.
If your electric vehicle has sustained a dent or a ding, contact Sioux Falls Dent Repair for our exemplary services! You can also book us for a free damage assessment.
This is a very common question, first off it depends on many factors when calculating a dent repair price. We run everything through a software system called Mobile Tech Rx. This software was designed quite a few years ago now and tailored specifically to the paintless dent repair industry. This software has all of our pricing programed into it. We simply scan the vehicles vin number to auto populate the vehicles info. From there we enter some additional information on the vehicle including mileage and plate number.
We will ALWAYS inspect your damage using a paintless dent repair light. This is the most crucial step of the entire estimating process, being able to properly see the damage. Then we measure the overall diameter of the damage, then the depth of the dent, which we do have a dent depth gauge that we can use. From there we then assess any factors such as body line dents, the metal the panel is made up of and so on. Then we figure out what we need to take apart, if anything, to remove the damaged area. From there the system comes up with a number and we come up with a price for a paintless dent repair.
There has been a lot of debate on how professional paintless dent repair is better than any other method of repairing dents, such as taking to an auto shop or doing it yourself with your repair kit. While attempting a DIY fix up is admirable and could save you some money in the long run, looking for a professional to get the job done is the most recommended way to go. This is because the pros outweigh the cons by a country mile. Here are some of the reasons why professional PDR is better.
One outstanding benefit of seeking a professional to perform the PDR for you is that most of them are covered by insurance. This way, you do not have to worry about the burden that comes with the repair costs. In addition, in case the technicians do more damage in the process of fixing, the costs of repairing these new damages are solely upon them. This wouldn’t be the case if you chose to go with a DIY kit. For starters, you cover the cost of everything, and secondly, in the event of further damage, insurance wouldn’t cover the cost of repairs.
Paintless dent repair is simple and easy for professionals because it is what they do day in and day out. Bearing that in mind, you can always trust them to complete a repair within the shortest time possible. You can drop your car off in the morning as you go to work and pick it up at the end of the day on your way home. It wouldn’t be that easy if you opted for a DIY toolkit. You will have to sacrifice some of your own time, that you would have otherwise used it to do some other constructive activities, to complete the repair job.
DIY kits can be costly to buy, and you will not use it as much to get value for it because not every day your car will have a dent that needs repair. Instead, why don’t you take it to your local PDR shop? The technicians over there have access to state-of-the-art equipment that they use every day for paintless dent repair jobs. On top of having the latest equipment, they do not charge extremely high prices, and you are sure of getting value for your money.
If you decide to skip professional PDR and try to take a swing at it yourself with a DIY toolkit, you risk causing further damage. This is because you do not have the experience, expertise, or appropriate tools to efficiently get the repair done. A professional, on the other hand, bears all these things, which puts them at a better place to assess the damage and fix it as they see fit.
Do not risk a DIY operation that may blow up in your face. Get a professional today.
Call or text Sioux Falls Dent Repair for a free quote at 605-205-8865.