Today, we’ll be taking a look at a 2016 Chevrolet Equinox in need of a big dent removal, this has a pretty bad door dent in it. As you can see, the damage is quite severe and starts all the way near the top of the door and goes through the body line. There is even a bit of damage towards the bottom of the door which we will have to get rid of.
Starting Off, Cold Glue
To get some of the dent out from the door, we will be using a product called Cold Glue and it is available from Glexo. The Cold Glue tab is fastened to the Slide Hammer that we use here in the Sioux Falls Dent Repair shop and the tab is then applied to the damaged area. By simply pulling the Slide Hammer back and forth a few times, we can get some of the damage out.
Next, we switch over to hot glue pull tabs – something used quite commonly in the PDR world. The tabs we’re using for this job is from Black Plague and it is from the Ice Tab series. We’ll be using the Elim A Dent glue gun with Cam Auto Glue to pull out some of the remaining damage. The glue takes a little longer to dry, but it offers a better and stronger pull. To pull on the glue tab, we’ll be using the KECO K-Bar which gives us a lot of leverage when it comes to pulling on tabs and getting out dents.
With the help of the PDR lights, you can see how all that pulling got rid of the majority of that large dent in the door. Once we finish working on the door from the front, we can then remove the door, door panel and start pushing out the damage from the back. We also have to remove the glass, the reason being is this glass is special to this type of vehicle, find out what’s different about this glass by Clicking Here. After we remove the door panel, we gain a lot more access to the back of the door panel and this lets us push out the remaining damage with our tools.
After removing the door and placing it under the PDR lights, we can see how much of the damage is still left and we can then figure out the kind of tools we would require for the job. Moving over to the lower side of the door, we have to hammer down the damage with a special tool. It takes a multiple hits and quite a bit of time to get the damage out 100%, but it is still faster than taking the car to a body shop.
See A Real Demonstration Here:
If you want to know more about Sioux Falls Dent Repair, go ahead and follow us on:
Today, Jack from Sioux Falls Dent Repair gives us a detailed look into how they go about writing a hail damage estimate, we will call it Hail damage estimating 101. Every PDR case is different and requires skilled technicians to assess the damage and come up with a correct estimate.
First Things First
The first thing we do in the shop is get the damaged area cleaned thoroughly so that we can see all the dents, dings, and scuffs easily. After the panel is cleaned, we use specialized PDR lights to get a better look at the surface. In this case, the vehicle we’re looking at is a 2017 Ford F150 and it is a relatively new car with just over 1,700 miles on it. As you can see, the PDR lights allow us to see all the dents and dings in the hood of this truck.
Every dent we find is circled first so that we don’t miss out on any damage later on. Then we use special sizing coins to determine the size of each dent. The coins range from quarter size to half dollar size and is placed in the dent to see how big or small it is. From the information we get with the coin sizing, we can go ahead and get the correct pricing as well. When we come up against a dent that is bigger than a half dollar, we mark it with “OS” which stands for oversized and we price those dents accordingly as well.
We found a total of 132 quarter sized dents and 7 oversized ones. Along with that, another thing we took into consideration when pricing the repair for this truck was that it was made from aluminum. Also, the underside of the hood was almost completely braced which means we had very little access to the damaged area with our regular tools. With this in mind, we had to use the glue pulling technique to get most of the damage out.
Some Things Need To Be Taken Apart
As you can see, as indicated with the letters R&I (remove and install), we also had to remove the headlight and the fender flare to take out the damage from the fenders on both sides of the vehicle.
If you have any questions or queries about hail damage or want some information on what we do here at Sioux Falls Dent Repair,
In today’s video, Jack takes us through a hail damage estimate for a 2015 Honda Fit that came into the Sioux Falls Dent Repair shop. As you can see, the damage is quite severe and even caused the paint in the roof to crack in multiple spots.
For the customer to claim their insurance, we needed to take photographs and even mark off the severely damaged areas. The car itself, as you can see, is covered in “oversized” dents which are indicated with “X” marks. In terms of size, an oversized dent is any dent that is larger than a half dollar coin.
The roof and hood were written as replacement pieces because of the severity of the damage and that is what we used to write up our estimate. The dents are all across the body of the car and has even caused the paint to crack in many spots. In some spots, the glass will also have to be removed and reinstalled once the job is complete.
Unfortunately, once the estimate is made, the car is going to be a complete loss for the customer and they will have the option to either get reimbursed or buy it back and get it fixed afterwards. The customer also has a tow hitch attached to the front of the vehicle which means that it will have to be removed and will be included in the eventual cost. We also came across a hairline dent between the side mirror and the frame of the vehicle which will need work. Also, there are signs of previous PDR work on this car, but it isn’t complete and isn’t a good job either.
So, that is how we at Sioux Falls Dent Repair go about writing up an estimate for hail damaged car. We mark off the larger dents and any extreme damage, we take to a body shop for repair or replacement.
Watch the whole process here:
If you have any hail damage that you want us to take a look at, go ahead and call or text us at 605-250-1023.
In today’s video, we are going to check out some of the hail damage tools that we use here at Sioux Falls Dent Repair. We will be looking at some of the pushing tools or hail rods that we use to get out all kinds of hail damage. While most of these tools can be used for all kinds of dent repair, they have twin tips which is specifically designed for hail damage repairs.
As you can see on the first tool, we can attach two different sized tips so that we can take out all the damage from a panel without having to change tools constantly. The tips are interchangeable and all depend on the size, depth, and severity of the dent itself. The bigger tip is the R4 from DeadDentTools.com and we use a Cherry Hard Tip on it to get out the initial damage. On the other side of the hail rod we have a sharper tip that is available on EdgyTools.com and is used for fine tuning and completing the job. There are companies that have even taken it even further and produced a four sided hail rod for holding four different tips but we haven’t gotten around to using one of those, yet.
The next rod is not only one of the first ones we got, but it is also one of the best ones we have in the shop. It is called the 36-inch Hail Interchangeable Tip Rod from DentCraftTools.com and it is all made form metal and is extremely durable. Going up from there, we also use the 60-inch Hail Interchangeable Tip Rod which is exactly the same – just bigger.
Tools Made From Carbon Fiber?!
The first rod that we saw is made entirely from carbon fiber and is available on CarbonTechPDRTools.com. The one we use is the Hail Rod and it comes in three separate pieces at 12-inches, 26-inches, and 46-inches. When we put the rod together, it measures 7-foot and gives us access to all parts of a damaged panel with ease. However, they do sell extensions to make the rod even longer. While it might not make sense for most to have a 10-foot hail rod, it is actually extremely helpful when you’re looking for extra leverage on larger vehicles.
Carbon Tech also has some grips on offer which are made from aluminum and make using the rod easier. Another great handle option from the brand is the T Handle which allows us to use both hands for some of the more stubborn dents that we have to deal with. We also use the T Handle to twist and push out the damage from tighter spaces where the entire tip head will not fit. Also, when dealing with tight spaces like truck beds, the twin tip head can be replaced with a single tip head – also available from Carbon Tech.
Another attachment you can get is the Single Bend Pick Tool and is used for taking out the smaller dents. There is also a Double Bend Pick Tool and they are great for getting under the roof of a car and pushing out any damage. Lastly, we also have a Whale Tail extension that lets us get out dents from tiny spaces.
If you have any queries or questions give us a call or text at 605-250-1023 we’ll be happy to chat with you.
In today’s video, we take a look at some of the latest additions to our Paintless Dent Repair tools collection. We made our recent purchase on Black Friday and got some great deals. Although most of the tools we’ve ordered have come in, we are still patiently waiting for the new dent reaper rods.
One of the first tools we’re going to look at is actually from Blehm and it’s called the SHUTT-UPS. It is the first time we have purchased Blehm and we are excited to start using them. Something that sets these tools apart is that the SHUTT-UPS come with adjustable handles which means they can be used from any angle and easily. There are different varieties of the SHUTT-UPS and come with different levels of curve so that you can reach practically all parts of the panel.
The next tool is called the Daniel Gromm Balloon Tip tool which is also from Blehm and is great for prying two panels apart. Before the Balloon Tip tools were released, we used to use the Whale Tip tools to get out the damage from panels. However, the Whale Tips are a lot sharper than the Balloon Tips and the later ensures that the metal and the paint (if any) is not damaged while we push out the dents. Nevertheless, both the tools work extremely well. The Balloon Tip tools are available in various sizes which is great for working on all kinds of dents and dings.
Next, we take a look at the KECO K-Beam Bridge Lifter which is a powerful tool in the PDR industry. What it actually does is that the K-Beam is placed on the vehicle body using the rubber legs and a pull tab is connected to the central lever. The lever can be spun manually or with the help of a drill to pull the glue tab out along with the dent. The K-Beam Bridge Lifter is designed for bigger dents and larger damage.
This is the time of the year where people wash their vehicles a lot less and therefore they don’t notice the smaller dents that they would have noticed in the summer months. We have been getting a lot of calls from people who are backing out of their garages and denting their side fenders.
One of the jobs we have on our hands right now is a door dent which is on a 2017 Honda. The dent extends from the bodyline and also comes with a tiny chip in the paint. The customer was fine with us just doing a small touch up job as the car was a lease turn-in. The PDR job will help them avoid any major fines or fees. PDR will always be more affordable than what a body shop has to offer and the customer knows that which is why they chose to come to us before bringing the vehicle back to the dealership. A body shop would have repainted the entire panel and would have most likely even had to paint and blend the front fender as well. As you can tell, that process would have been more expensive and time consuming.
Moving to the hood of the car, there is also a small dent in front – most likely from the vehicle hitting a bird. You can actually see the extent of the damage in the PDR lights and how distorted the hood really looks. So, we’ll be taking out the door and hood damage and getting the car back to the customer so that they can turn it back into the dealer without having to pay the extra fines. This car is a perfect candidate for PDR as the damage can be removed up to 80-90 percent and a regular person won’t even notice the difference, this allows the customer to save money!
Do You Have the Right to Select Your Own Hail Repair Company?
When a hailstorm hits, damages to your vehicle are bound to happen. These damages can leave dents and dings on your car’s body, and you will need to file an insurance claim.
Choose the Best Hail Repair Shop
There are two options available you can select from. Either select an auto body shop from the list your insurance company provides of approved shops or find your own shop to handle the repairs on your vehicle.
To keep yourself away from further headaches, choosing the best repair shop at the beginning will protect your car from future problems.
Types of Hail Repair
There are numerous options body shops provide for hail repair.
When it comes to repairing those dents, you have two choices: Traditional bodywork and Paintless dent removal
Traditional Bodywork
This is for the more severe damage that necessitates filling the dent and repairing the stain. It will typically take some days in the store.
This may include:
Replacing body panels
Using fillers or glazing
Heat repair using an oxyacetylene torch
Paintless Dent Removal
Paintless dent removal can often be the best choice for a vehicle. PDR entails going to the rear of the dent and massaging the body back into place. This choice is fast, simple and less likely to affect the valuation of your vehicle. It is also less expensive, but it isn’t always an option with some dents and losses.
What You Need To Know When Choosing a Company for Dent Repair
Most insurance companies give their customers the option to either choose from their list of approved companies or select the company of their choice to get their vehicles repaired.
When choosing a company to get your vehicle repaired, you need to keep in mind some factors.
Any company you choose must have the necessary tools to remove any dents. Dent repair is not what you can do yourself; it’s a job for professionals. This implies that the company you choose must have all of the necessary equipment to carry out the repair. Before you decide, double-check for all of the appropriate resources available.
To obtain the necessary effects, auto dent repair requires the use of the appropriate technology. Dent removal companies that use cutting-edge technologies should be at the top of the list of companies you should consider. As advanced equipment provides high-quality facilities, dents and dings are easy to remove.
Dent repair requires expertise. Only certified and experienced professionals can do it. When looking for a company to get your vehicle repaired, always look for a company and ask for proof of the necessary certifications.
Why Sioux Falls Dent Repair?
Sioux Falls Dent repair has the best customer services. Sioux Falls gives its customers the privilege to talk to their customers and listen to their problems while offering you recommendations. Sioux Falls gives its customers free estimates and repair facilities from certified technicians, making us a popular choice for most customers.
Contact Us
Next time a hailstorm damages your car, make sure to look at these factors when you choose a dent repair company. If you live in South Dakota, Sioux Falls Dent Repair has got it covered for you. You can CLICK HERE or call for a quoteCLICK HERE TO CALL
